pailtongue03

Door Handle Replacement Door handles seem like something minor, but if you dislike the style or design of them, or find them difficult to use and use, you should consider replacing them. With a little patience, you can put in the new handle in no time. Modern door handles are typically equipped with cover plates which hide the screws for an attractive appearance. If your new handle does not already have them connected, you'll need to attach them separately. Remove the handle that was previously used The door handle is not only a decorative addition to your home It's also an important safety feature that lets you to lock and unlock the door. However, as time passes the door handle could lose its grip, become loose, or look old and worn out. This is a sign that it's probably time to replace it. If your door handle is becoming difficult to use, it may be time to replace it. This is a serious problem as you will no longer be in a position to lock or unlock the door and put you and your family at risk. Another reason to replace the door handle is if it's damaged or broken. A broken door handle can be very dangerous, especially in the event that your children or senior family members are unable to open it, and get trapped within. Luckily, it's quite simple to fix a damaged door handle by simply replacing the old one. The majority of modern door handles are a standard size and so they will fit on any door. If you're not sure if your new door handle will fit, try removing the old one and measuring its housing holes. This will allow you to purchase the correct size door handle. The easiest method to take off the door handle you have been using is to unscrew it from the door. Usually you'll need a screwdriver. However some door handles have an outer cover plate that hides the mounting screws so you'll need to pry off this cover plate to get access to the screws beneath. Once you have removed the old handle, take an outline of how the spindle is connected so that you can align it when you fit your new one. You can also remove the door handle by unscrewing the latch mechanism. This is usually done with the screwdriver, but you'll need to find the small latch, which is located on the edge of the trim piece. After you have removed the latch, you can unscrew the handle from the strike plate and then remove the latch away from the door's edge. Take off the Strike Plate If you are replacing the handle, you'll want to replace the latch plate, which holds the hole that the door's latch is inserted into when it closes. The package the new handles come in will have two options for latch plates: either a rectangular or a circular one (see the above diagram that outlines door handle parts). If your current latch plate has rectangular in shape, swap it out for the circular one so that the latch is able to hook into the strike plate in a way that makes the handle more comfortable to use. The first step is to remove the screw that's holding the old latch plate in place. The screws are typically tight and require a lot of force to loosen them. If possible, it may be beneficial to have another person assist with this part. The latch plate should be removed from the door once the screws have been removed. If it is stuck or doesn't move, use a small nail file to scratch around the edges of the latch plate. This will sometimes free the plate. You can now move on to creating the new door strike plate for installation. Using the screws made of wood that came with the new handles, screw the latch plate onto the inside of the doorjamb. Be careful not to tighten too much the screws, as this can damage the strike plate. If you're unsure whether the latch plate is in its proper position, close and open the door to see whether it latches and closes properly. If not you'll have to adjust the strikeplate up or down, forward or back until the door locks correctly. If the door is still moving or jiggles, you may have to enlarge your latch hole on the strike plate. This is more prevalent on older doors. It could be caused by wear and tear, hinges that are too small, a wrong size latch or damaged strike plate. If this is the case, follow the same procedure for adjusting the strike plate, but with a metal file instead of an hammer and chisel. Take off the Latch The latch is the metal piece that is angled that slides in and out of the hole that runs along the inside edge of your door. The latch is pushed forward when you turn the handle. It also hooks into a hole in the door frame to keep the door shut. If your door shakes when you close it, changing the latch may be the only thing needed to fix it. The screws that secure the door latch are hard to spot, but you can usually use a screwdriver to make an insignificant hole on the trim plate and then pry the latch off. After removing the trim plate, you should be able to remove the latch as well as the bolts that hold it and the spindle that holds it. If the latch won't come out it is suggested to use an old-fashioned paper clip or tool to spring it loose from the handle mechanism. Insert the item into the recessed latch slot, and gently twist it or jiggle until you feel that the latch and handle are beginning to split. It is possible to repeat this procedure several times before you can take the latch off. Once the old latch is removed, you should be able to insert the new latch into the slot without any issues. Make use of the new screws to attach the latch to the strike plate or door frame. Make sure it is correctly positioned in the slot, aligned with the screw chambers. Before installing the new handle, make certain to measure your existing backset (the distance from the centre of the large hole on the front surface of the door to the edge). You should also check whether the size of the latch on the new handle is a good match to this measurement. You'll need a new cylinder for your lock if replacing the handle and latch, or your old one is damaged. If you're not changing the locks the new latch should fit in your existing recess and will work just fine with the keys you have currently. Be sure to choose a latch with a rectangular cover plate that match your handles. Removal of the Cover Plate Door handles can begin to look worn over time, but if you replace them with a contemporary lever-on-rose design, it's an easy and quick DIY project and decorating idea that can improve the overall appearance of your home. You can purchase complete sets of door handles that come with matching escutcheons and privacy adaptor kits. To replace the door handle inside take off the cover plate (or rose), which protects the screws and the inner mechanism. Use a flathead for removing the plate. It may have an opening on one edge or be held in place by pins. After the cover plate is removed take the screw that holds the inside handle in place, and then set it aside. You'll also want to remove the screws that hold the latch and inner plates, which you can do by loosening them using a Philips screwdriver. Then, take the inner plates and latch plate from the door and set them aside. Most doors have gaps between the jamb of the door and the inner edge of the frame that allows for a handle, but not all have. If yours doesn't then you'll have to drill a hole into the door to install the new handle. This is the same procedure as opening a door locked however, you'll have to be extra careful not to damage the door or frame. After the holes are drilled then you'll need to install new door knob screws. Make sure you purchase the same size as the previous ones, so you don't end up with the handle that is too tight or too loose. Installing a new latch and strike rod is also necessary. They aren't included in most door handle sets. If you're looking for a high-quality replacement for your interior door handle set Try the Amazon's Choice FAERSI two-piece chrome finish handle set. It's a factory-fit and has received hundreds of five-star reviews from delighted customers. It's a great choice to replace damaged or worn door handle hardware inside your Chevy HHR.